PDA

View Full Version : Numbering frets as position markers



Skyblues
01-28-2018, 08:13 PM
Is there a way to number the frets randomly? As an example, I am putting together some common chord charts and I'm putting all the chords (and related scales) around the 2nd fret (of the diagram). But, I want to number those frets as the 2nd fret on the Neck Diagrams software as say the 5th, 7th, etc fret.

Is this possible?

Thanks,
Jim

I have attached an example of what I'm working on (at least, I tried to attach it).

177

Dean
01-29-2018, 06:48 PM
Hi Jim

We have the 'At starting fret only' option but I guess that's only good if you're starting the fretboard at the 2nd fret?

http://www.neckdiagrams.com/images/zendesk/Inspector/frets_tab/starting_fret.png

Another option is to not use a 'text box' instead. The example below shows how to number everyfret using a text box but it;s the same principle as numbering just the frets you require. Yes, it;s a bit of a hack and takes some aligning but this is something we're improving in our next major release.

http://www.neckdiagrams.com/images/zendesk/Inspector/frets_tab/number_every_fret.png

Thanks
Dean